 |
Akuzuki Hardwood Floor Flooring Stapler & Cleat Nailer Nail Gun
Product DetailsManufacturer: Akuzuki Model: NS-779 Product features: - Can be used on 1/2", 5/8", 3/4" and 25/32" floor thickness
- Uses 15.5 Gauge Staples from 1" to 2"
- Uses 16 Gauge L-shaped Nail from 1.5" to 2"
- Operating Air Pressure: 60-100 PSI
- Light die cast aluminum body
Tools and Hardware Reviews of Akuzuki Hardwood Floor Flooring Stapler & Cleat Nailer Nail GunCustomer Review: Akuzuki Floor nailer Summary: 5 Stars
03-27-2010
I had three rooms to lay down hardwood on.The first one I borrowed a air nailer.
I am doing the work for my self I take my time and wanted a nailer of my own and the person that owned the nailer neede it back and rental would not be cost effective.
This Akuzuki nailer that sells for $249.00 was a lot more nailer than I had expected as far as quality goes.
The one thing I did to help me position the nailer on the flooring was to mark the shoe of the nailer with "white out" typing remover. I did this right where the notch is. This made finding the exact spot to line up the nailer with the flooring edge much easier b/c the shoe of the nailer is all black and it was hard to determine where to position the nailer when lining up the notch quickly.It took out the fuss of making sure I got the nailer in the right place.
I found the nailer worked well,I liked the trigger feature for fireing it. I did notice that the cleats (nails) had to be almost empty before I could reload the magazine with another clip of cleats in order for the spring mechanism to catch.
One has the option of using cleats or staples,I chose cleats as I was told they hold better,
We did Natural Hickory and Brazilian Golden Teak,both very hard woods. I recommend using the Fin/Trim trim head screws to fasten the flooring down where you can not access the nailer.
So if your trying to decide which nailer to use I think you'll be very happy with this one (not sure of the model # as there are no markings on it)that sells for $249.00.
Mountainman716
Description of Akuzuki Hardwood Floor Flooring Stapler & Cleat Nailer Nail GunThe is a heavy duty, 2 in 1 pneumatic flooring nailer. It is designed to install tongue and groove hardwood flooring with L-shaped nail or staple. Flooring in thicknesses of 1/2", 5/8", 3/4" and 25/32" can be installed using 1.5" and 2" length nail respectively.
Your purchase includes: Brand New Factory Sealed box containing the 2-in-1 Flooring Cleat Nailer and Stapler. Heavy Duty Blow Mold Carrying Case. 2 oz bottle of Oil. High Quality light weight white rubber non marring Mallet. Detailed Instruction Manual. Detailed Internal Component Diagram. All necessary tools to service the product. Four Hex Keys. Service Wrench for adjustment, assembly, and repair. Non-Marring base flooring plate for installing 1/2" or 5/8" flooring. Non-Marring base flooring plate for installing 3/4" or 25/32" flooring. Safety Protective Eye Goggles. Complete Rebuild/Repair kit, includes Gaskets, O-Rings, Seals, and Springs to rebuild the entire gun.
|
 |
|
|
|