Makita BTD140 LXT 18-Volt Lithium Ion Impact Driver Kit

Makita BTD140 LXT 18-Volt Lithium Ion Impact Driver Kit

Makita BTD140 LXT 18-Volt Lithium Ion Impact Driver Kit
List Price: $558.00
Our Price: $372.88
You Save: $185.12 (33%)
Availability: Usually ships in 3-4 business days
Buy Used: from $255.99 (click here)
Category: Tools
See more product details


(Click here)

Product Details

Manufacturer: Makita
Model: BTD140
Product features:
  • LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles.
  • Makita built 4-pole maximum torque motor delivers 1,280 in. lbs. of efficient torque in a compact size.
  • 50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator fatigue
  • LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
  • Makita's proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longer.
Accessories:

Tools and Hardware Reviews of Makita BTD140 LXT 18-Volt Lithium Ion Impact Driver Kit

Customer Review: 4+ ...Awesome little unit, but it can get HOT !
Summary: 4 Stars

Piggy backing on the other reviews (weight, speed, torque, easy bit change [albeit it will only take the med length or longer hex bits, or adapters, as it locks in the bit like a ball bearing lock shackle does], etc), I'll just mention my own experience.

First off, let me say this is near the very top of all my tools. I was driving in several dozen stretches of 2x2 redwood slats on top of a patio cover project, and my old 9.6v kit just couldn't hack it. 1/2 of the 3" gold deck screws either stripped out long before getting set in, and/or the bits were getting shredded. And only 20-25 screws a charge. It was pure aggrevation.

Ordered the LXT-600 kit which comes with one of these drills (yeah, I already own all of these tools corded, but lithium cordless...just needed an excuse). Like a prayer answered! Roughly 75-100 screws per charge, and only lost a few. In no time, like butter. Blew up a couple of Dewalt bits...just shattered them in half (use Apex, much better...this is what the carpenters who work at the school district with me use. More expensive, but...). I demo'd this baby to a buddy at work, and drove the same 3" screw nearly all the way through a 4x4.

BUT, a warning (why the 4 1/2). After quick, long periods of shooting screws, this unit gets hot in the web of the thumb (if right handed). I had to wear a glove to keep going on the deck project. The other day I was using it to drive self-tapping screws to hold a wood deck down to a trailer (probably better done with a driver drill, I realized later, or pilot holes), and after running straight for 1/2-1 minute a few dozen times, I had a blister on my hand which turned into a 3/16 wide x 1/16 deep divet (now healing). I hope makita makes a snap-in deflector plate or cover for this area. I plan on calling them about it (sure they know already). A thin neoprene or fingerless glove (at minimum) would stop the problem. Other than that, this is a great tool.

Description of Makita BTD140 LXT 18-Volt Lithium Ion Impact Driver Kit

We've come a long way from sweat and a screwdriver. A hundred years ago, builders would never have envisioned a tool as powerful and efficient as this one. Heck, even 20 years ago. Science has ushered battery technology along, and the LXT Lithium-Ion system that powers this impact driver has a ton of advantages over standard NiMH or NiCad batteries. The Lithium-Ion technology means 1,400 battery life cycles, longer run time, lighter weight, a great reduction in the self-discharge rate and built-in shock-absorbing features to protect your battery.

But perhaps the coolest innovation is what Makita calls its 45-minute Optimum Charger. It actually talks to the batteries it charges throughout the cycle, using a built-in memory chip in the battery and, believe it or not, a CPU chip in the charger itself, which analyzes the data stored in the battery chip to decide on the best charging method at that time.

Slide one of these batteries onto the supremely designed impact driver and you'll be amazed at what you can do. Despite its size (for the record, it's 5-3/4 inches long and weighs barely 3 pounds), this driver kicks out an unbelievable 1,280 in./lbs. of efficient torque, a no-load speed of 2,300 rpm and 3,200 blows per minute, putting it way out in front of the pack. We really like the integrated worklight, too. It illuminates as soon as you pull the trigger, and it stays on for 10 seconds or so after you release the trigger, too - a handy little feature.

Makita's always made ergonomically positive tools that feel good in your hand and take the strain off your body, and this one's no exception. The slightly curved grip is so comfortable, and because it's super compact and lightweight, this driver's an absolute pleasure to run. -- Kris Jensen-Van Heste

What's in the Box
Impact driver, two LXT Lithium-Ion 3.0Ah batteries, 45-minute optimum charger, tool case


We?ve come a long way from sweat and a screwdriver. A hundred years ago, builders would never have envisioned a tool as powerful and efficient as this one. Heck, even 20 years ago. Science has ushered battery technology along, and the LXT Lithium-Ion system that powers this impact driver has a ton of advantages over standard NiMH or NiCad batteries. The Lithium-Ion technology means 1,400 battery life cycles, longer run time, lighter weight, a great reduction in the self-discharge rate and built-in shock-absorbing features to protect your battery.

But perhaps the coolest innovation is what Makita calls its 45-minute Optimum Charger. It actually talks to the batteries it charges throughout the cycle, using a built-in memory chip in the battery and, believe it or not, a CPU chip in the charger itself, which analyzes the data stored in the battery chip to decide on the best charging method at that time.

Slide one of these batteries onto the supremely designed impact driver and you?ll be amazed at what you can do. Despite its size (for the record, it?s 5-3/4 inches long and weighs barely 3 pounds), this driver kicks out an unbelievable 1,280 in./lbs. of efficient torque, a no-load speed of 2,300 rpm and 3,200 blows per minute, putting it way out in front of the pack. We really like the integrated worklight, too. It illuminates as soon as you pull the trigger, and it stays on for 10 seconds or so after you release the trigger, too ? a handy little feature.

Makita?s always made ergonomically positive tools that feel good in your hand and take the strain off your body, and this one?s no exception. The slightly curved grip is so comfortable, and because it?s super compact and lightweight, this driver?s an absolute pleasure to run. -- Kris Jensen-Van Heste

What?s in the Box
Impact driver, two LXT Lithium-Ion 3.0Ah batteries, 45-minute optimum charger, tool case

Power Tools

Tools and Hardware
Bestsellers in Makita
Makita 9910 3-Inch X 18-Inch Belt Sander ImageMakita 9910 3-Inch X 18-Inch Belt Sander
Makita; Tools
Price in other shops: $132.45
Makita 9526PB 4" Angle Grinder ImageMakita 9526PB 4" Angle Grinder
Makita; Tools
Price in other shops: $116.59
Makita 9217SPC 7-Inch Electronic Sander-Polisher ImageMakita 9217SPC 7-Inch Electronic Sander-Polisher
Makita; Tools
Price in other shops: $329.00
Makita 6834 4.3 Amp Collated Screwdriver ImageMakita 6834 4.3 Amp Collated Screwdriver
Makita; Tools
Price in other shops: $424.20
Makita 6336DWBE 1/2-Inch Cordless Driver-Drill Kit, 2-Speed, Variable Speed, Reversible ImageMakita 6336DWBE 1/ 2-Inch Cordless Driver-Drill Kit, 2-Speed, Variable Speed, Reversible
Makita; Tools
Price in other shops: $385.00
Makita 4191DZ 3-3/8-Inch Cordless Tile/Glass Saw ImageMakita 4191DZ 3-3/ 8-Inch Cordless Tile/ Glass Saw
Makita; Tools
Price in other shops: $237.00
Makita AF503 5/8-Inch to 2-Inch 18-Gauge Brad Nailer ImageMakita AF503 5/ 8-Inch to 2-Inch 18-Gauge Brad Nailer
Makita; Tools
Price in other shops: $232.00
Makita 6914DWBE 30th Anniversary 12 Volt Cordless Kit with Variable Speed, Reversible Impact Driver ImageMakita 6914DWBE 30th Anniversary 12 Volt Cordless Kit with Variable Speed, Reversible Impact Driver
Makita; Tools
Price in other shops: $430.00
Makita DA391DWD 3/8-Inch Cordless Angle Drill Kit ImageMakita DA391DWD 3/ 8-Inch Cordless Angle Drill Kit
Makita; Tools
Best price: $250.00
Makita 9523NBH 4-Inch Angle Grinder ImageMakita 9523NBH 4-Inch Angle Grinder
Makita; Tools
Price in other shops: $113.00
Illustrated catalog for tools and hardware.
Our prices are low