 |
Porter-Cable CFFN250S 2-1/2-Inch 16 Gauge Finish Nailer/Compressor Combo Pack
Product DetailsManufacturer: Porter-Cable Model: CFFN250S Product features: Accessories:
Tools and Hardware Reviews of Porter-Cable CFFN250S 2-1/2-Inch 16 Gauge Finish Nailer/Compressor Combo PackCustomer Review: A nice tidy package! Summary: 5 Stars
I'm glad I didn't buy the Porter-Cable 18 gage brad nailer kit from Home Depot. Instead, I spent the additional $$$ at The Building Box in Mississauga, Ontario for this well-rounded kit to install our primed MDF 4-1/2" crown moulding project this Spring. This kit cost me $$$ plus 15% taxes. I guess to keep the price low, Porter-Cable outfitted this kit with their 135 psi pancake compressor, rather than their 150 psi compressor which is sold with their 18 gage brad nailer kit. The positives of the kit are; 1) The 17 piece accessory kit with the pistol grip blower, 2) The gun has a balanced and quality feel, 3) Easy to load gun, 4) Easy to clear jammed nails, 5) Shorter and more streamlined design of gun, 6) Enough power to countersink a 2-1/2" nail into red oak, 7) Portable and reasonably light-weight compressor, 8) Very good sight line of nailing surface, 9) Value purchase. The negatives of this kit are; 1) Noisy compressor, 2) Gun does not warn user when it runs out of nails, 3) Should have provided 2-1/2" nails, rather than the 2" nails, 4) Compressor's auto on/off lever can dislodge from the switch assembly when the lever is pushed/pulled at the wrong angle, 5) Must order the free black coloured trigger separately, 6) The gun will at the odd time spall the MDF moulding surface at the nail's point of entry (which means more caulking).
Description of Porter-Cable CFFN250S 2-1/2-Inch 16 Gauge Finish Nailer/Compressor Combo PackThough Porter-Cable's compressor/nailer combo includes everything you need to get started--finish nailer, compressor, 25-foot/300 psi air hose (with ferrules on both ends), fittings, Teflon joint tape, finish nails, oil, wrenches, safety glasses, and manual--it's by no means a starter kit. These are excellent, top-quality tools: first-time buyers can't go wrong, and longtime professionals will like the value. The 16-gauge finish nailer packs plenty of power (oak trim? no problem--better yet, no predrilling, hammering, and setting) and shoots a wide range of nails from 3/4 to 2-1/2 inches that handle everything from crown molding installation to building fine furniture. The nailer also has all the performance features we like: easy top loading, an onboard depth adjustment that lets you adjust the countersink without fiddling with the compressor, an easy-release side hatch on the nosepiece for clearing jams, and an adjustable exhaust port that lets you direct the backfire where you want it.The 2-horsepower compressor, with its 6-gallon tank, has plenty of reserve capacity so it doesn't cycle as often as other compressors. Plus, its oil-free design means less maintenance. The lightweight compressor, though a little noisy (but only a little), is easily transported (there's a nice hand slot on top). With a maximum draw of only 10 amps, this compressor is also much less likely to trip a breaker than other, higher-amp compressors, which saves you from having to tramp back and forth to the breaker box. What else? There's also a carrying case for the nailer: no-nonsense and plastic, but certainly protective. Hands down, though, the real kicker here is the savings--compared to what you'd spend buying everything in this package item by item, it's pretty hard to resist. --Jon Groebner
|
 |