Skylink SC-100 Security System Deluxe Kit
List Price:
Our Price: $89.00
You Save: $40.77 (31%)
Availability: Usually ships in 1-2 business days
Buy Used: from $79.00 (click here)
Category: Tools
See more product details
Product Details
Manufacturer: SkylinkModel: SC-100
Product features:
- Rolling Code Technology - provides maximum security and reduces false alarm
- System good for most small to medium size homes (up to 3000-feet). Additional accessories needed to secure larger homes.
- Works in conjunction with up to 30 skylink security accessories (including dial alert)
- Includes a piercing 110 dB siren
- Up to 100-foot range
- Skylink 4B-434 Four-Button Remote
- Skylink AA-433 Audio Alarm
- Skylink AS-433E Alarm Sensor
- Skylink FS-433 Flood Sensor
- Skylink HW-434 Remote Panic Wrist Watch
Tools and Hardware Reviews of Skylink SC-100 Security System Deluxe Kit
Customer Review: 3 Years of use and no problems. Here are some tips for install and use.
Summary: 5 Stars
I've been using this security system for 3 years and have had NO problems with it. I had one false alarm and that was my fault (accidentally pressed the panic button on the keychain remote while it was in my pocket). The system comes with an AC powered control panel with battery back up, two door/window sensors, a keychain remote control and a motion detector. I also ordered the Skylink KP-434 Keypad Control, and extra door/window sensors as well as some window stickers and a lighted yard sign. I didn't get mine from Amazon, I got it from Norco/HomeSecurityStore because they offered free tech support if I had any problems with it. The user manual is easy to understand and has photographs of all the equipment, installation process, programming and use. Very easy to follow. I had the system completely installed and working in about 2 hours. All the batteries needed for setup are included. The system is easy to expand for all sorts of devices including telephone monitoring. You can set the system to call a neighbor, family member, police station or even an independent monitoring service. The built in siren is loud enough to be heard on my street even when all the doors are closed. The control pad and keypad control are backlit so you can see them in the dark. The system uses all sorts of batteries from 9volts to tiny little camera type batteries to those little flat round lithium batteries. Replacements can be found at any Radioshack.
The system has 5 zones and multiple devices can be programmed for each zone. Four of the five zones are visible on the control pannel and the fifth zone is "invisible". Zone one is for entrance doors and has delayed entrance feature. Zone two is for motion detectors. Zones 3 and 4 are for additional sensors set for instant activation. Zone 5 is for control devices like keypads, keychain remotes and panic buttons. You can custom program the control panel for whatever your needs are but the built in programs are probably sufficient for almost any purpose. The system supports multiple PIN numbers. It uses rolling code tech for additional security. For a fairly inexpensive system it is pretty state of the art.
I like the design of the control panel. There is no screen with little messages to read. Instead you can tell exactly what state the system is in with the use of red and green lights. In a few days of use you will be able to glance at the panel and tell what mode the system is in. You don't have to walk up to it and read messages.
TIPS FOR INSTALLATION AND USE
1. READ THE INSTRUCTION MANUAL. If you don't do this then you will not know how to arm the system. There are no on and off buttons. You have to remember your PIN Code and know which letters and symbol to push and the only way to do that is to read the manual. The manual covers everything you need to know except for installing optional devices and complete instructions come with those devices. If you do have a problem, Skylink has decent customer service. I had to call them one time with a question in three years and within 3 minutes of dialing the number I was off the phone with my question answered.
2. DON'T INSTALL THE CONTROL PANEL BY THE ENTRANCE DOOR OR SIT IT ON A TABLE WITH THE CORD SHOWING. Install it in a less obvious place and cover the cord. I did a wall mount in the middle of the house and hid the AC cord underneath the woodwork and the plug is in an outlet behind a heavy piece of furniture. If the cord should get cut, the battery in the control panel will keep the system activated. If anyone attempts to remove the battery without first entering the PIN then the alarm will activate. Not fool proof but better than nothing. Don't give an intruder any help by just sitting the thing out with the cord visible.
3. USE THE HARDWARE PROVIDED TO MOUNT THE SYSTEM PARTS AND DON'T HANG IT UP WITH TAPE. Yes, the alarm comes with double sided tape but the instructions clearly point out this is only for the initial temporary install. Once you have all the sensors, panels and detectors installed with tape and have checked to see that it is working properly then you MUST use the screws that are provided to do a permanent install. It helps to have a small drill to start the holes for the screw. Use the tape for checking placement and for leaving both hands free to handle the little sensor magnets and screws. Use a small Philips screwdriver. If you leave this thing up with just the provided temporary tape then be sure things are gonna fall down (probably in the middle of the night, giving you a false alarm).
4. BUY A KEYPAD FOR THE ENTRANCE DOOR and put the control panel somewhere else. Even if you use the keychain remote to arm and disarm the system, you will still want a keypad by your main entrance so other people can turn the system on and off (babysitter, housesitter, relatives etc.). The system will support an additional PIN that you can give to someone for temporary access. Then you can reset the system with a different PIN while keep your personal PIN. Instructions for this are in the ADVANCED PROGRAMMING section of the user manual.
5. CHANGE THE BATTERIES! If you don't keep up with the batteries the thing won't work. Every sensor has some sort of alert to let you know it is working. All door sensors have a test button. If it dosen't light up red when you press the button then your battery is dead. Also, put the system in "chime" mode and check every sensor and detector to make sure signal is getting to the control pannel. The motion detector will make a chirping sound when the battery is low to alert you. It also has a red light behind the screen that flashes briefly when motion is detected so look up at every once in a while to make sure you see the red light when you move. If you don't see it turn red, you missed the warning chirps and should change the battery. The control panel has a low battery indicator light as does the keypad control. Whenever there is a time change and you change out the batteries in your smoke detectors, do the same thing for your alarm system. You can buy all the strange little batteries on line or at any electronic store like Radio Shack. If you do that regularly then your system will keep working. It will take you about 15 minutes to change all the batteries but that isn't such a big deal is it?
6. DON'T INSTALL THE MOTION DETECTOR AROUND AIR VENTS OR WHERE PETS WALK. If you have curtains near an AC/Heating vent then the air will blow the curtains and your motion detector will notice and give you a false alarm. Don't install the motion detector in a room with a running ceiling fan. Turn the fan off before you turn on the motion detector. If you have a cat or dog, keep them out of the area covered by the motion detector . They WILL set it off, even a little cat. Even on the low sensitivity a small cat will set these off. You will have to close the door and keep kitty out of any room covered by the motion detector or you are gonna get false alarms and if you have the telephone option set up you may get complaints about false alarm nuisance calls so either close the door so kitty dosen't wander in or don't turn the motion detector on. Those are your only choices.
7. INSTALL YARD SIGN AND WINDOW STICKERS, OUTSIDE LIGHTS and DEADBOLT LOCKS and leave a light on inside when you go out at night and chances are a burglar will pass you by for a less protected looking house and you will never have your alarm system tested for real.
I got everything for under $200 bucks, installed it myself in a couple of hours, have kept the batteries maintained, used a little bit of thought when planning the placement of everything, READ THE MANUAL and have used the system on a regular basis for 3 years without any problems. If you take a little time to learn it, it is easy to use. I think it was a good purchase.
Description of Skylink SC-100 Security System Deluxe Kit
This DIY wireless security system is easy to install and ready to use. It is a 4-zone system is designed for houses up to 3000 sq. ft., plus apartments, condos, offices and businesses. Uses rolling code technology for maximum security and fewer false alarms. Emits a piercing 110dB siren and sends signal to emergency dialer (Item# 17615, sold separately) to call preset phone numbers. Up to 100ft. range. Lighted keypad with chime, instant and delay modes. Low battery indicator. Can be customized to fit individual needs. Includes control panel, motion sensor, 2 door/window contact sensors, keychain transmitter, AC adapter, batteries and mounting hardware.Designed for use in small- to medium-sized homes or offices of up to 3,000 square feet, the Skylink SC-100 Security System Deluxe Kit helps you protect your family from unwanted intruders or theft, while also giving you real peace of mind in case of emergencies. Offering an operating range of up to 100 feet, the SC-100 requires no monitoring or registration fees and is a snap to setup, arm, and disarm.
|
 The SC-100 is an easy-to-install wireless security system that requires no monthly monitoring fees. View larger. |
Keep your home or business safe and secure with this reliable, cutting-edge wireless security system. The SC-100 utilizes innovative technology with trouble-free wireless connections to provide security, making it a great choice for protecting against intruders and safeguarding in case of an accident, fire, flood, or other emergency.
Works with up to 30 Skylink Accessories for Easy Customization and Expansion
Because the SC-100 works in conjunction with up to 30 Skylink security accessories, including Dial Alert, it can be customized to suit your needs. This flexibility means you can easily expand your system to accommodate larger spaces or businesses that require a higher level of protection.
Do-it-Yourself System Eliminates the Need for Monitoring Fees
The SC-100 is a do-it-yourself system, which means you can easily install it yourself and then use it without paying monitoring fees or registering with an alarm company. To arm or disarm the system, simply enter your personal code or use the keychain transmitter. With this user-friendly system, you gain real peace of mind and control over your personal safety and that of your family, employees, and others at your home or business--all without excessive costs or upkeep.
Rolling-Code Technology for Maximum Security and Fewer False Alarms
Skylink is the first company to incorporate rolling-code technology into a home/business security system, which means that the SC-100 provides maximum security while virtually eliminating the number of false alarms. A rolling code (or hopping code) is often used in entry systems that don't require a key, because it prevents an eavesdropper from capturing and using your personal security code. Thanks to rolling-code technology, the SC-100's control panel will recognize radio waves only from its remote sensors (door/window sensor, motion sensor, and keychain transmitter), thereby preventing high-tech thieves from duplicating signals and tampering with your system.
Motion, Door, and Window Sensors Provide Reliable Emergency Protection
The SC-100 comes complete with a motion sensor and two door/window sensors, enough coverage for small- to medium-sized homes. If any sensors are triggered when the system is armed, and the correct pin is not entered, the included 110dB siren will make a piercing sound to ward off intruders and draw attention to your home.
Works with Dial Alert for Immediate Emergency Help
The SC-100 can assist you in getting immediate help in case of an emergency. When its siren goes off, the SC-100 will immediately send a signal to Dial Alert (sold separately), which will call emergency phone numbers that you have preset. When someone answers the phone, your prerecorded message will play, and the contact person will be told that you need emergency help right away.
Easy to Program with Convenient Keypad
The SC-100 includes an easily programmable, lighted keypad with Chime, Instant, and Delay modes. Simply enter your preset pin code to arm or disarm the system; an LED will indicate when the alarm is properly set. All the accessories are preprogrammed to work with the control panel, so you won't have to worry about time-consuming, individual setup of each component.
The SC-100 runs on AC power with one nine-volt battery (included) as backup. A convenient low-battery indicator lets you know when it's time for a replacement. The system also comes with all necessary mounting hardware.
What's in the Box
Alarm with control panel and keypad, motion sensor, two door/window contact sensors, 4B434 keychain transmitter, AC adapter, all DC batteries, mounting materials, and instruction manual.
 This kit includes everything you need to guard a medium-sized home. Add up to 30 Skylink accessories for full, customized protection of larger spaces. |
Home Security Systems
Skylink HA-318T Household Alert Indoor/ Outdoor Motion SensorSkylink; Tools
Best price: $9.95
Price in other shops:
Skylink 38 Visor Mount RemoteSkylink; Tools
Best price: $18.00
Skylink SC-1000 Complete Wireless Alarm SystemSkylink; Tools
Best price: $159.99
Price in other shops:
Skylink G6VR Visor Clip Remote SetSkylink; Tools
Best price: $9.95
Price in other shops:
Skylink G6V2 Smart 2 Button Garage Door Opener Visor Clip RemoteSkylink; Tools
Skylink 69 Gate Operator or Garage Door Opener Model 69N Universal Keychain RemoteSkylink; Tools
Best price: $22.99
Skylink MultiLink SD-310M Mini Keychain Remote 310MHzSkylink; Tools
Best price: $11.99
MultiLink CR-390M - LiftMaster Compatible, Mini Key chain Gate or Garage Door OpenerSkylink; Tools
Best price: $9.00
Skylink MS-001 Magnetic SwitchSkylink; Tools
Best price: $7.28
Price in other shops:
Skylink 318TN Keychain TransmitterSkylink; Tools
Best price: $14.98
Price in other shops:
Skylink SC-10 Security System Basic KitSkylink; Tools
Best price: $58.45
Price in other shops:
Skylink KP-434 Keypad ControlSkylink; Tools
Best price: $24.98
Price in other shops:
Skylink 4B-434 Four-Button RemoteSkylink; Tools
Best price: $15.70
Price in other shops:
Skylink KP-434W Keypad TransmitterSkylink; Tools
Best price: $29.05
Price in other shops:
Skylink 4B-434W Keychain RemoteSkylink; Tools
Best price: $19.99
Price in other shops:
Skylink WT-433W Door/ Window SensorSkylink; Tools
Best price: $15.64
Price in other shops:
Skylink AA-433 Audio AlarmSkylink; Tools
Best price: $29.27
Price in other shops:
Skylink PS-434A Motion SensorSkylink; Tools
Best price: $21.00
Price in other shops:
Skylink WT-433 Window/ Door SensorSkylink; Tools
Best price: $16.85
Price in other shops:
Skylink PS-434A Motion SensorSkylink; Tools
Best price: $20.37
Price in other shops: